Seven Effective Ways To Get More Out Of Biocide In Oil And Gas
As all of us know, biocides is a broadly used sewage treatment agent, which has a massive demand on the current market, and can also be recognized by customers with its stable functionality and no pollution. However, you understand What are the methods of sterilizing biocides?
1.
We can start the hot water before putting in the biocides. Focus on the water temperature, IRO biocide generally approximately 60 degrees, not more than 70 degrees, otherwise it will affect the action of this biocides, and then filter may be used, if It's delivered, it can be inserted at one time, or it can be added once a change, and it can be placed at a fixed point;
2.
Use the treated funnel to put it: This approach is comparatively straightforward and relatively straightforward. We could put the appropriate Number of bactericidal algicide to the funnel and right put the medicine to the boiler at a certain rate; If there is a water tank with algaecide from the boiler, then there's absolutely no economizer. This way, we can immediately put the medicine to the water tank, along with the medication can be directly sent to the furnace with the water supply system to attain the effect of sterilization and algae elimination; 4. Standard shipping, the sewage release speed of this method is approximately 7%, but to ensure that there's 1 discharge per change, the time is controlled at about 50s. Be aware that if there's absolutely no water level change following the sewage treatment, it is necessary to check if the furnace is obstructed. .
Evaluation of the main functional consequences of biocides The ecological environment where we live has also experienced earth-shaking alterations. The soil has been destroyed along with the water quality has become complicated. In the creation of sector and research, a high number of chemical agents are employed, which makes the various chemical components in the water excess, making a good atmosphere for the development of algae and fungi in the atmosphere, which affects its further improvement. Therefore, how can we fix these algae and fungi?
At this time, it's our turn to use our biocides. The look is colorless or pale yellow viscous liquid. Why is it bactericidal and algae-killing? That is because the biocides itself contains active chlorine, monoatomic oxy-hydroxyl bands and some polymers, which can effectively curb the formation of the expanding environment and remove the nutrients required for algae and fungi growth. Ingredients to achieve the results of sterilization and algae elimination.
From the production process, other sterilizing agents are occasionally utilized in combination with additional water treatment agents to restrain the normal performance of the circulating water system in the water treatment system. Because the bactericidal treatment agent is a compound, we should take protective measures when using it. After use, it ought to be sealed in a plastic bucket and placed in a cool, ventilated and dry place inside.
Our company is a producer of bactericidal therapy agents, with research group, fantastic product quality and high credibility. If you want a deep comprehension of our products, it is possible to consult the official website.
